Survival Blog (http://survivalblog.com/) reviewed our gear!
For those of you that aren't familiar with Survival Blog, they are the internet's most popular daily blog on survival and preparedness topics. There are over 320,000 unique visits to their site per week. We (Regulation Tactical) are honored that they would take the time out and have a look out our kit.
Below is a snippet, but to read the full article go to their site: http://survivalblog.com/scots-product-review-regulation-tactical-belt-glide-panel-magazine-pouches-and-load-bearing-brackets/
The first item in the review is the $29.99 Glide Instructor Belt, which solves the problem of removing and then replacing an outside the waist band (OWB) holster, which is a pain with a normal belt. It is a clever multiple layered device with lots of Velcro, and it reminds me of the inner/outer systems used with many competition and police duty belts. The idea is that you have an inner belt with Velcro that goes through your pants’ belt loops and thenan outer belt with more Velcro on which you have all of your gear. When you are ready for business, you just apply the outer belt to the inner one and off you go to shoot targets or deal with bad guys. Back in my days of shooting action pistol matches that didn’t require concealment, I used this sort of rig and found it surprisingly secure.
The Glide Instructor belt dispenses with having to wear two belts and has what I believe is a unique system of three layers that overlap where the two ends of the belt connect. There is an inner layer on the shooter’s dominant side that connects to the tongue from the dominant side with Velcro. The outer layer on the shooter’s dominant side then attaches to the inner layers with Velcro and goes over the belt loops. Having the outer layer go over the belt loops is the key to the neat trick this belt performs for folks who use outside the waistband holsters. You can quickly, easily, and safely put on and remove your handgun in one quick operation by peeling up the outer layer and slipping it through the holster’s belt loops. You do get the ripping Velcro sound, of course, but you don’t have to undo your belt and unthread it to get the holster and gun off and then rethread it to hold your pants up.
Additionally, remember that there are three layers of Glide Belt. Two of them are still holding your pants up while you are putting on or taking off your weapon. We often have other gear secured to our belts– spare magazines, multi-tools, and the like; all of that weight will pull your pants down. You need three hands during this operation if using a regular belt; you’d need two to thread things and a third to hold it all up.
For anyone who has to come and go from non-permissive locations, this is a real blessing. I often find myself going through this ordeal of restricted freedom and one of the worst parts of the problem (besides being disarmed) is the additional handling of the weapon, often in places where is it awkward, such as a car. In many cases, one will unholster the weapon in the process, which is less safe than leaving it holstered. A holstered handgun, assuming it’s in a well-designed holster and weapon, is very safe. It is far less safe to have to be moving the pistol around in your hand, particularly in the close confines of a vehicle. With the Glide Belt, you simply pull up the outer layer, slide the holster with handgun off, secure it safely, and reattach the outer belt layer.
There is also the benefit of having removed the holster rather than leaving it on your belt as I have often done to avoid the struggle with removing the holster. Should you have to go through a security point, you won’t have to explain why you have a holster and where your weapon is. Trust me, even empty holsters can raise hackles on an anti-freedom security person.
I usually wear an inside the waist band (IWB) holster and choose models with snap on belt loops so I can remove the whole rig in one operation. The issue of getting the thing off is one of the reasons. While I think the IWB conceals better, it is less comfortable. However, since I have been wearing this belt, I have been finding myself using some of the fine OWB holsters I own a lot more often and enjoying the extra comfort they provide.
My one glitch is that I am on the absolute maximum edge of one of the sizes, and if I were to gain more weight (my wife cooks too well and I’m spending too much time writing instead of exercising) I will have problems. If you are at the very top boundary of a size, it might be smarter to grudgingly take the larger one.
The belts can be had in black, ranger green, coyote brown, or MultiCam. I chose Ranger Green for the one I purchased to match my Scout uniform and the olive drab cargo pants and shorts I frequent.
The workmanship is very nice with excellent stitching, and the materials appear durable and of high quality. The Velcro is the military grade hook and loop, and it works well; the layers adhere strongly to one another. They make so much noise when you peel them off that I learned not to remove it in the bedroom after my suffering wife has gone to sleep. You can reduce the noise level by going slow, but that takes patience.
I will admit to finding the instructional video on using the belt to be helpful. I’m left-handed, and I initially got a bit perplexed on how to use it, but after a little head scratching, it became quite clear. I normally thread belts into the left side of my pants, but with this one, the video showed it going in the other way. It suddenly dawned on me that the video was for the majority of people who are right-handers, and when I use it I could keep on threading it the same way as my regular belts. Duh.
I wondered about how securely it would hold up the pistol, but I had zero problems with a steel Colt Commander, which at 43 ounces loaded with a seven round magazine is significantly heavier than a Glock 17 at 32 ounces, which is a pistol probably more commonly carried these days than my Colt.
I found this to be a very ingenious design and quite useful for those who must disrobe from their sidearm. It works well, and the price, when compared to similar sorts of belts, is extremely reasonable. It is now my go-to belt for OWB holsters. In black, it might be inconspicuous enough to wear with dressier clothes, if the belt loops are wide enough.
The $4 Glide Panel is used with the Glide Belt when one has gear with 1.75-inch loops. The Glide Belt is 1.5 inches wide so that it will work with most jeans and trousers. We often wind up with holsters made with 1.75 inch belt loops and this leads to slop that can delay the draw stroke or cause discomfort, as the weapon has more room to slip about. The Glide Panel is simply a somewhat rigid 9-inch long strip that is still flexible enough to wrap around the body and widens the belt to 1.75 inches. It has Velcro on both sides. You stick it to the outer layer, the holster goes on, and then it is all pressed down on the inner layer. It works well and helps make for a more solid carry, as the handgun is always where it should be and not flopping around. I am usually careful to size my belts and holsters to match, but this crafty bit of gear allows you to get by with one less belt if you have holsters in both 1.5- and 1.75-inch sizes, as I do.
Regulation Tactical loaned me two of their $35 ammo pouches. These are clever and highly versatile items that, like the Glide Belt, make use of a lot of Velcro.
The pouch can be configured in several ways; I hope I don’t miss any. First, you have a choice to use a shock cord retainer, if you want extra security in retaining your magazines or put it aside if you want faster access to a reload. You can configure the pouch to hold one or two magazines. Finally, you can remove or leave the spring, which retains the magazines.
The spring was the interesting part to me. Its purpose is to provide secure magazine retention, even if you configure the pouch to hold two magazine and you have withdrawn one. This is no easy trick. Conventional pouches simply can’t retain a magazine after the first one is used, and on those you need to have a flap or strap secured with a hook, loop, or snap. If you don’t secure the pouch, the magazine can be lost, whch is not good. On the other hand, a flap or strap slows down access...
Thank you to "Jerking The Trigger" for covering the Glide Belt!
"The new Regulation Tactical Glide Belt is a minimalist gun belt that lacks any kind of buckle or hardware. At first glance, it looks like a standard stiff webbing belt with inner belt but upon closer inspection, you can see that the “inner belt” is not a separate piece but rather an integrate piece of the belt that is only open at one end. This creates some interest functionality in terms of how gear is mounted on the belt. It is very simple and quite clever."
For the full article go to: http://jerkingthetrigger.com/2015/02/20/regulation-tactical-glide-belt/
Just a little bit about "Jerking The Trigger."
Their website: http://jerkingthetrigger.com/
Their Facebook page: https://www.facebook.com/JerkingtheTrigger
Big thank you to the editors and writer at Guns and Ammo for your coverage of our Reflex Mag Pouch Mk2 in the Book of AR-15!